Cleanup Kconfig files ...

This patch provides a global cleanup barebox Kconfig files. This includes
replacing spaces to tabs, formatting in accordance format.
No functional changes.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Revert "ARM: Use armlinux_bootparams address for DTB" ...

This patch placed the flattened devicetree to armlinux_bootparams.
armlinux_bootparams normally is at SDRAM_START + 0x100. The kernels
initial page tables are normally at SDRAM_START + 0x4000, so the
flattened devicetree gets overwritten once it exceeds 0x3f00 bytes
which is quite common.

Revert this patch for now once a better solution can be found

This reverts commit 0c4108f.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Alexander Shiyan <shc_work@mail.ru>

ARM: imx_v7_defconfig: Enable some features needed for the multi image ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: ubi: add missing prototype for ubi_volume_notify ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: ubi: remove calls to nonexisting functions ...

We do not have ubi_do_get_volume_info and ubi_do_get_device_info
and do not need them yet, so remove calls to these functions to fix
compilation.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/serial'

Merge branch 'for-next/ppc'

Merge branch 'for-next/omap'

Merge branch 'for-next/of' ...

Conflicts:
	arch/arm/boards/freescale-mx53-loco/board.c
	drivers/of/Makefile

Merge branch 'for-next/mxs'

Merge branch 'for-next/mtd'

Merge branch 'for-next/misc'

Merge branch 'for-next/mips'

Merge branch 'for-next/mfd'

Merge branch 'for-next/marvell' ...

Conflicts:
	arch/arm/boards/Makefile
	arch/arm/dts/Makefile

Merge branch 'for-next/lz4'

Merge branch 'for-next/imx' ...

Conflicts:
	arch/arm/boards/Makefile

Merge branch 'for-next/imagesize'

Merge branch 'for-next/friendlyarm'

Merge branch 'for-next/driver'

Merge branch 'for-next/at91'

Release v2013.08.0 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: Turn 'bad block at' message into pr_debug ...

As bad blocks get more and more on modern nand flashes this message
starts getting annoying.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

CONFIG_PANIC_HANG: replace #ifdef with IS_ENABLED() ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

resurrect CONFIG_PANIC_HANG option ...

The CONFIG_PANIC_HANG a part of the U-Boot heritage.
It is used in the barebox code, but there is no mention
of this option in Kconfig files.

Sometimes this option is very helpful, so
let's resurrect it.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pbl: add generated file piggy.lz4 to .gitignore ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

P2020RDB: map boot flash. ...

The chip select 0 (boot flash) registers are updated by the board
specific code as it is not done by the cpu early initialisation
any more.

Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mpc85xx: remove local bus initialisation ...

The early initialisation of chip select 0 (boot flash) is removed
from cpu initialisation. This removes the dependency on board
base address definition.

Consequently, cpu_init_f is not called in the start-up code but
added to the init call list as cpu_init_r. Also the file
arch/ppc/mach-mpc85xx/fsl_lbc.c is deleted.

Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: bootm: Print Kernel commandline unconditionally ...

The Kernel commandline is an important debugging aid when people
ask why their Kernel won't start, so print it unconditionally.
This is done in !dt mode anyway, so also do it with dt.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: Use dts syntax when printing devicetrees ...

Our devicetree printing is close to correct dts syntax, so fix
some remaining differences:

- Use an equal sign instead of a colon to separate a poperty name and
  a value
- Add a semicolon at the end of properties
- Make sure we do not print a separator for empty properties

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>