pbl: Add support for memory_display ...

The PBL has console support now, so add memory_display support aswell
which can be a good debugging aid.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: Create platform_device when creating AMBA device failed ...

If creating an AMBA device failed, maybe because AMBA support is
not compiled in, register the device as regular platform device.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: MXS: ocotp: Add devicetree support ...

Add the device tree compatible strings.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: MXS: Create ocotp device in SoC code ...

The ocotp device is completely SoC internal, no need to register
it from boards. Register it from SoC code instead.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

serial: stm_serial: Add devicetree support ...

This adds device tree support for the stm serial driver. This
driver really is a AMBA primecell, so the amba-pl011 could be
used. However, the current code tries to get the apb_pclk before
the clocks are registered, so this does not work. Use the stm
driver instead until a solution is found.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: mxs: Add devicetree support ...

Add device tree compatibles and allow retrieving data from device tree
instead of platform_data only.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: MXS: Make gpio a driver ...

This turns the MXS gpio support into a driver.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: MXS: Do not register devices with device tree support ...

When a device tree is present the SoC internal devices come from
it, so do not register them as platform devices.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MXS: power-init: inline only once used functions ...

mxs_power_init_4p2_params and mxs_power_init_4p2_regulator are used
only once, so inline the code.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: MXS: Fix vddd brownout setting ...

The brownout setting can be at maximum 7*25mV below the voltage
setting of the regulator. Set it to the minimum Voltage which is
1325mV.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: MXS: imx28evk: Update environment and config ...

This switches the imx28evk to new environment and updates the
defconfig file for tons of new features.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: MXS: imx28evk: Add lowlevel support ...

This switches the imx28evk to multiimage support and adds the
lowlevel initialization to make the bootlets unnecessary.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: board: virt2real: build lowlevel in proper target ...

Fixes build with PBL enabled.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: musb-dsps: select OFDEVICE ...

Fixes:
In function `dsps_probe': undefined reference to `of_usb_get_dr_mode'

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: console_console: put functions under correct ifdef ...

So they aren't build when no console support is selected.

Fixes:
In function `console_get_by_dev': undefined reference to `console_list'

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

docs: fix broken reference ...

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

docs: fix missing newlines in codeblocks ...

Those cause a warning while generating the docs
as well as misrendering of the generated docs.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

defaultenv-2: fix misplace NV dir in env ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: fix a warning in help.c ...

Fix the following warning:

commands/help.c: In function ‘list_group’:
commands/help.c:57:4: warning: format not a string literal and
no format arguments [-Wformat-security]
    printf(cmdtp->name);
    ^

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

command/splash: fix return value ...

return errno when possible

otherwise return 0 for ok or 1 for error

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

kconfig/menu.c:590: fix warning: ‘jump’ may be used uninitialized in this function [-Wmaybe-uninitialized] ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/pbl-console'

Merge branch 'for-next/netconsole'

Merge branch 'for-next/mxs'

Merge branch 'for-next/misc'

Merge branch 'for-next/kbuild'

Merge branch 'for-next/imx'

Merge branch 'for-next/efi'

Merge branch 'for-next/arm'

Merge branch 'for-next/am335x'