LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

2016-09-15	80c55cb Browse files » pbl: console: Let console pointer survive BSS clearing ... The PBL console support may be configured before the BSS segment is cleared. Put the pointer into the data section so that it is not affected by the BSS clearing. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 15 Sep 2016
2016-09-14	7dc3354 Browse files » ARM: i.MX6: Enable parent propagation for clk_gate2 ... Enable parent rate propagation for clk_gate2 to allow the clock consumers to adjust their rates. One effect of this is that the i.MX6 NAND controller now can adjust its rate. It already called a clk_set_rate(rate, 96000000), but this had no effect, so the clock stayed at reset default 24MHz resulting in a rather slow timing. This became a problem when commit "1daa3bc mtd: nand_mxs: Setup timing" introduced EDO timing mode for faster NAND chips. EDO mode can only work properly for cycle times < 30ns (at least that's specified in the ONFI spec). 1daa3bc resulted in sporadic NAND read errors on some boards. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Sam Ravnborg <sam@ravnborg.org> Sascha Hauer committed on 14 Sep 2016
2016-09-14	47f72a3 Browse files » ARM: karo-tx6: Include correct device tree ... As a i.MX6dl board dts imx6dl-tx6u.dts should include imx6dl.dtsi, not the i.MX6q variant. This fixes various pinctrl problems. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 14 Sep 2016
2016-09-13	2463a2a Browse files » Merge branch 'for-next/dts' Sascha Hauer committed on 13 Sep 2016
	a1ddbba Browse files » dts: update to v4.7 ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 13 Sep 2016
	1e82b24 Browse files » dts: update to v4.7-rc6 ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 13 Sep 2016
	f4714e5 Browse files » Merge branch 'for-next/video' Sascha Hauer committed on 13 Sep 2016
	074a8fd Browse files » Merge branch 'for-next/socfpga' Sascha Hauer committed on 13 Sep 2016
	0e1892b Browse files » Merge branch 'for-next/rockchip' Sascha Hauer committed on 13 Sep 2016
	dd53457 Browse files » Merge branch 'for-next/misc' Sascha Hauer committed on 13 Sep 2016
	ebe2e91 Browse files » Merge branch 'for-next/mips' Sascha Hauer committed on 13 Sep 2016
	6b8ae8f Browse files » Merge branch 'for-next/menu' Sascha Hauer committed on 13 Sep 2016
	b2c398f Browse files » Merge branch 'for-next/imx' Sascha Hauer committed on 13 Sep 2016
	0a12c71 Browse files » Merge branch 'for-next/defenv-2' Sascha Hauer committed on 13 Sep 2016
	v2016.09.0 7e6b762 Browse files » Release v2016.09.0 ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 13 Sep 2016
2016-09-12	b12f380 Browse files » ARM i.MX50: Add iomux definitions for non-DT board implementations ... Add non-DT IOMUX definitions for the i.MX50 SOC by converting linux dts/imx50-pinfunc.h by script. perl -we 'while(<>) { next unless /^#define MX50_PAD/; @in=split "[[:space:]]+", uc($_); @out=(); @out[0..4]=@in[3, 2, 5, 4, 6]; $out[2] =~ s/0X//; $out[4] =~ s/0X//; $out[3] = "__NA_" if $out[3] eq "0X000"; push @out, $in[1] =~ /__UART/? "MX50_UART_PAD_CTRL": "NO_PAD_CTRL"; $out=join(", ", @out); $out =~ s/0X/0x/g; print "#define $in[1]\t\t\tIOMUX_PAD($out)\n"; }' < dts/src/arm/imx50-pinfunc.h Additional changes: * typical PAD settings for UART, SPI, I2C and ESDHC * SION bits set for all I2C MUX options Signed-off-by: Alexander Kurz <akurz@blala.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Kurz authored on 9 Sep 2016 Sascha Hauer committed on 12 Sep 2016
	f6ebdf2 Browse files » Add i.MX50 support ... Signed-off-by: Alexander Kurz <akurz@blala.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Kurz authored on 9 Sep 2016 Sascha Hauer committed on 12 Sep 2016
	25be412 Browse files » ARM: i.MX drivers: enable i.MX50 where already supported ... The i.MX50 SOC includes one ESDHCv3, three ESDHCv2, one cspi and two ecspi instances which are supported by existing drivers. Signed-off-by: Alexander Kurz <akurz@blala.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Kurz authored on 9 Sep 2016 Sascha Hauer committed on 12 Sep 2016
	ed014ce Browse files » ARM: i.MX clock: cleanup imx50 incompatibilities ... Move all MX5 clock functionality which does not apply to i.MX50 to a new mx51_mx53 related function. Signed-off-by: Alexander Kurz <akurz@blala.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Kurz authored on 9 Sep 2016 Sascha Hauer committed on 12 Sep 2016
	2f9ff8a Browse files » scripts: imx: add support for i.MX50 ... Add imximg support for i.MX50 processors which use the i.MX flash header v2 format. Signed-off-by: Alexander Kurz <akurz@blala.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Kurz authored on 9 Sep 2016 Sascha Hauer committed on 12 Sep 2016
	cf4414f Browse files » ARM: add common definitions for i.MX50 SOC ... Signed-off-by: Alexander Kurz <akurz@blala.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Kurz authored on 9 Sep 2016 Sascha Hauer committed on 12 Sep 2016
	bf6ddd6 Browse files » xstrdup: don't panic on xstrdup(NULL) ... Instead return just NULL. This matches the behaviour of kstrdup in the kernel and xstrdup in busybox. This fixes a panic with CONFIG_CMD_MAGICVAR=y and CONFIG_CMD_MAGICVAR_HELP unset in magicvar_add() where description is always NULL. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Uwe Kleine-König authored on 9 Sep 2016 Sascha Hauer committed on 12 Sep 2016
2016-09-09	fd1ddfa Browse files » Documentation: aarch64-qemu-virt: fix sphinx issues ... The patch fixes these sphinx issues: barebox/Documentation/boards/aarch64-qemu-virt.rst:7: WARNING: Title underline too short. Running barebox on QEMU aarch64 virt machine ^^^^^^^^^^^^^^^^^^^^^^^ barebox/Documentation/boards/aarch64-qemu-virt.rst:1: ERROR: Document or section may not begin with a transition. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: Raphael Poggi <poggi.raph@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 7 Sep 2016 Sascha Hauer committed on 9 Sep 2016
2016-09-09	edeeec5 Browse files » Documentation: usb: fix sphinx warning ... The patch fixes this sphinx warnings: barebox/Documentation/user/usb.rst:61: WARNING: Could not lex literal_block as "c". Highlighting skipped. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 7 Sep 2016 Sascha Hauer committed on 9 Sep 2016
2016-09-06	fbdfa76 Browse files » commands: ubiupdatevol: confirm success with return value 0 ... Treat the write() case analogously to the read() case and do not return the number of most recently written bytes as the status of sucessful command execution. Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ulrich Ölmann authored on 5 Sep 2016 Sascha Hauer committed on 6 Sep 2016
2016-09-06	90494c6 Browse files » commands: ubiupdatevol: store return value of read() in a signed int ... With an unsigned int test for errors from read() can never become true. Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ulrich Ölmann authored on 5 Sep 2016 Sascha Hauer committed on 6 Sep 2016
2016-09-05	faf2ec6 Browse files » mci: mmci: Fix read FIFO handling ... According to the Linux kernel and the qemu code, the MMCIFIFOCNT contains the remaining number of words to read, excluding those that are already in the FIFO. So the current number of bytes in the FIFO is host_remain - (readl(base + MMCIFIFOCNT) << 2). Also writing to MMCIDATACTRL will reset the read counter. As a result, MCI_DATABLOCKEND is never set and read_bytes() waits forever. With this change, SD-Card support on qemu vexpress works correctly. Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Michael Olbrich authored on 2 Sep 2016 Sascha Hauer committed on 5 Sep 2016
	a1109d7 Browse files » Fix small typo in common/Kconfig ... Fix small typo frendly -> friendly Signed-off-by: Sam Van Den Berge <sam.van.den.berge@telenet.be> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sam Van Den Berge authored on 1 Sep 2016 Sascha Hauer committed on 5 Sep 2016
	958b3a5 Browse files » commands: saveenv: exit on invalid option ... Saveenv should not perform any actions if an invalid parameter was given. Signed-off-by: Enrico Jorns <ejo@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Enrico Jorns authored on 1 Sep 2016 Sascha Hauer committed on 5 Sep 2016
	b5952e8 Browse files » usb: i.MX chipidea: Enable VBUS regulator when needed ... We should enable VBUS only in host mode, not unconditionally during probe(). Fix that. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 5 Sep 2016