ARM: mx3/mx35_3ds: increase kernel partition size to 4 MiB ...

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: mx3/mx35_3ds: add missing nand device ...

Otherwise the kernel would not register the nand partitions.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

defaultenv: update: add nfs support ...

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

show_progress: fix progress bar for files > 32 MiB ...

The next limit with the current code will probably 2GiB.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net/nfs: increase timeout to 15 seconds ...

On my laptop with avahi enabled (linux mdns implementation), the unmount
take quite long, because the avahi daemon tries to resolve the client's
host name. This leads to a delay of about 8 seconds of the unmount reply
messages, so that barebox runs into a timeout. This patch increases the
NFS timeout to 15 to work around the problem.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: fec_imx: configure FEC for 10Mbit when necessary ...

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: miidev: factor out miidev_get_status() ...

Currently, we can only print the phy_status. Factor out the routine to
get the status, so we can query it from fec drivers and configure
accordingly. Needed because mx28 needs a special bit set for 10Mbit.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: fec_imx: enable payload length check and pause frames ...

Q: "the linux driver add these bits, why not we?"
A: Because nobody activated the bits?

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: fec_imx: refactor R_CNTRL setup ...

Introduce a variable which gets updated when needed and only written
once. Will make further additions easier.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: fec_imx: small cleanups ...

remove double include, remove unused (and double in case of RCNTRL)
defines, sort the includes at least somewhat.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM i.MX freescale-mx35-3-stack: support 256 MiB RAM ...

Extend DCD table and low level init routines. Add barebox SDRAM
device. Also, fix the memory size for bank 0 to 128MB. It was
accidently changed to 124MB here:

commit f928efa
Author: Sascha Hauer <s.hauer@pengutronix.de>
Date:   Tue Jul 19 09:58:32 2011 +0200

    add a add_mem_device function

    Add a helper function for boards to register their memory
    devices. This makes the board code smaller and also helps
    getting rid of map_base and struct memory_platform_data.

    And switch all of the memory to it

Signed-off-by: Roman Fietze <roman.fietze@telemotive.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb/gadget: fix poller NPE in early polling ...

The timings of the poller calling have changed, digging out
a latent bug in pxa27x udc controller.
The polling routine is called before the probe function is
called, and the driver internal are not initialized at that
time. This triggers a NULL pointer exception.

Fix it by moving poller registration after driver probe.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

at91: specify the bare_init max size for each soc ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

introduce barebox_bare_init_size to known the bare_init size and check it ...

this allow to check we do not exceed the size of the SRAM as example

introduce BAREBOX_MAX_BARE_INIT_SIZE the maximum size of bare_init
this will allow your bare_init will fit in SRAM as example
ARCH can overwrite it via ARCH_BAREBOX_MAX_BARE_INIT_SIZE

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM pcm043: Add overlay support ...

Adding overlay support for phyCORE-i.MX35.
Also move the TEXT_BASE to leave enough space for the overlay image
at the end of the RAM.

Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

imx-ipu-fb: Add overlay support ...

Adding overlay support for i.MX3 sdc.

Foreground channel only works when background is also enabled.
The foreground video mode is always the same as the background.

Also added alpha command to set the alpha value of the foreground.

Tested on a phyCORE-i.MX35.

Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

imx-ipu-fb: Fix offset for IPU Clock. ...

The offset for the IPU Clock in the CGR1 register is 18 not 22.
See MCIMX35RM table 14-17.

Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

video imx-ipu-fb: add num_modes to imx3 boards ...

Added num_modes to all imx_ipu_fb_platform_data structs.
Removed defines for pcm043 to choose display.
We may switch this during runtime now.

Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

imx-ipu-fb: Add support for multiple video modes ...

Make support of multiple video modes possible for i.MX3 boards.

Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM pca-a-l1: should depend on ARCH_OMAP3 ...

Signed-off-by: Juergen Kilb <J.Kilb@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM pca-a-l1: fix board_init ...

board_init was moved to pure_initcall. broken since:

commit 0adce7e
Author: Sascha Hauer <s.hauer@pengutronix.de>
Date:   Sun Jan 15 21:11:17 2012 +0100

    ARM omap3: move board_init to pure_initcall

    board_init initializes the mux and sdram. For both there is no
    need to configure this so early. Move the code to a pure_initcall
    and remove the surrounding unneeded code.

    Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
    Tested-by: Sanjeev Premi <premi@ti.com>

Signed-off-by: Juergen Kilb <J.Kilb@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM pca-a-l1: delete platform.S ...

since commit 494a12f
platform lowlevel init was moved to mach-omap.

Signed-off-by: Juergen Kilb <J.Kilb@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM pca-a-l1: call omap3_core_init from board code ...

since commit ae2ac15
a_init was renamed to omap3_core_init and called from board code.

Signed-off-by: Juergen Kilb <J.Kilb@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ns16550: fix ier selection ...

The document "PC16550D Universal Asynchronous
Receiver Transmitter with FIFOs" (vers. June 1995,
http://www.national.com/ds/PC/PC16550D.pdf) states
that IER (Interrupt Enable Register) is accessible
if the bit DLAB = 0 (DLAB is bit 7 in LCR; in barebox
DLAB known as LCR_BKSE).

So before IER access we need set DLAB to 0.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ns16550: write zero to ier only once ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ns16550: make ns16550_serial_init_port() shorter ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ns16550: support for UART with broken FIFO ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Revert "mtd omap nand: fix driver without CONFIG_PARAMETER" ...

This reverts commit 7762f96.

already applied by d002818

    fix gpmc_nand_probe without param support

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor ...

cherry-picked from U-Boot.

commit 69716c1
Author: Jason Kridner <jkridner@beagleboard.org>
Date:   Wed Apr 20 08:54:16 2011 -0500

    USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor

    Remove __attribute__ ((packed)) to prevent byte access to soc
    registers in some gcc versions.

    Having patches to enable ehci for the BeagleBoard lying around for
    several months, this one was the show-stopper.

    Switched to align(4), rather than remove the attribute, per suggestion
    from Alexander.

    Credits have to go to Laine Walker-Avina <lwalkera@ieee.org> for
    finding the problem.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM pca-a-l1: fix board_init ...

board_init is now called omap3_board_init. broken since:

commit 494a12f
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date:   Sat Jan 14 15:51:05 2012 +0100

    omap3: move platform lowlevel init to mach-omap

    this will allow to switch omap3 to standard organisation

    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
    Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>