Release v2015.05.0 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: phy: Do not double remove phy device ...

This fixes: 80264a8 driver: Call bus->remove instead of driver->remove

On mvebu it happens that:

Upon device shutdown, when iterating through the active device list,
the phy0 device is removed before mdio-mvebu. Then, when the mdio bus
device is removed, the phy0 device is removed again, here:

mdio_bus_remove(on mdio-mvebu)
  mvebu_mdio_remove
    mdiobus_unregister
      unregister_device
        mdio_bus_remove(on phy0)

Fix this by setting the mdio busses phy_map[phy->addr] to NULL when
unregistering the phy device, so that mdiobus_unregister no longer
finds a valid phy_device when iterating over the busses device list.

Reported-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>

PCI: fill in bus primary field ...

This was erroneously left uninitialzed as nothing was using it.
The i.MX6 PCI driver needs this to be filled properly to decide
if a config space access is allowed for a specific devfn.

This fixes PCI enumeration on the Gateworks GW54xx board.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

PCI: register and active bridge device before proceeding to scan ...

The bridge device needs to be registered and activated before
the scanning can proceed, as the bridge is the parent for other
devices.

This fixes a NULL ptr derefernce when scanning PCI hierarchies
with bridges behind bridges.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: e1000: add HAS_DMA dependency ...

The e1000 driver uses the dma coherent functions
and thus can only be build for architectures implementing them.

Here is mips malta build error log:

  drivers/built-in.o: In function `e1000_transmit':
  drivers/net/e1000.c:(.text.e1000_transmit+0x80): undefined reference to
  `dma_sync_single_for_device'
  drivers/built-in.o: In function `e1000_poll':
  drivers/net/e1000.c:(.text.e1000_poll+0x60): undefined reference to
  `dma_sync_single_for_cpu'

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: partition: Fix OF partition fixup ...

To get the number of address cells and size cells we have to use
the newly created partition node, not the parent device node. The
parent device node returns the address/size cells of the controller
node, not the partition node.

On an am335x machine this fixes the device tree passed to Linux.
The situation there is:
	...
	gpmc@50000000 {
		...
		#address-cells = <0x2>;
		#size-cells = <0x1>;
		ranges = <0x0 0x0 0x8000000 0x10000000>;
		...
		nand@0,0 {
			reg = <0x0 0x0 0x0>;
			#address-cells = <0x1>;
			#size-cells = <0x1>;
			...
			partition@7 {
				label = "system";
				reg = <0x220000 0x7de0000>;
			};
		};
	};

and without this patch barebox passes three bytes for
partition@7's reg property instead of only two which naturally
confuses Linux and yields to the system partition to start at 0
with a size of 0x220000.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

ARM: highbank: select OFTREE ...

The board code uses quite a few OF functions and it doesn't seem
reasonable to run this board without DT support.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

USB: xHCI: Sync non-coherent DMA buffers ...

When working with non-coherent transfer buffers, we have to sync
device and cpu for outgoing and incoming buffers. Fix the driver where
non-coherent buffers are used in device context.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/state'

Merge branch 'for-next/pxa'

Merge branch 'for-next/pci'

Merge branch 'for-next/net'

Merge branch 'for-next/misc'

Merge branch 'for-next/imx'

Merge branch 'for-next/dts'

Merge branch 'for-next/driver'

Merge branch 'for-next/crypto'

Merge branch 'for-next/at91'

.mailmap: Fix Juergens name ...

It's Juergen Borleis now, not Beisert.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dts: update to v4.0-rc6 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dts: update to v4.0-rc4 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dts: update to v4.0-rc3 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dts: update to v4.0-rc2 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Release v2015.04.0 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

make PBL_CONSOLE depend on PBL_IMAGE ...

PBL_CONSOLE option is used only for building PBL. See this output:

    barebox$ git grep PBL_CONSOLE
    arch/arm/configs/tx28stk5_defconfig:CONFIG_PBL_CONSOLE=y
    common/Kconfig:config PBL_CONSOLE
    common/Makefile:pbl-$(CONFIG_PBL_CONSOLE)       += memory_display.o
    include/printk.h:       (defined(__PBL__) && defined(CONFIG_PBL_CONSOLE))
    include/stdio.h:        (defined(__PBL__) && defined(CONFIG_PBL_CONSOLE))
    lib/Makefile:pbl-$(CONFIG_PBL_CONSOLE) += vsprintf.o
    pbl/Makefile:pbl-$(CONFIG_PBL_CONSOLE) += console.o

PBL_CONSOLE looks confusing in PBL-less configuration
so it's better to enable it only if PBL is enabled.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: pxa: add mainstone board support ...

Add support for the Intel XScale PXA270 development system platform.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: smc1111: add a quirk for pxa pxa27x platforms ...

As hinted in the linux kernel driver, pxa platforms such as mainstone,
stargate and idp have a broken design, where half-word writes not
aligned to a word address are not working.

This patch is a taking back the half-word write accessor for this
specific case from the linux kernel.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: smc1111: fix platform data initializations ...

The configuration and control setup introduced in commit "extend the
driver for 91c94 and 91c96 support" suffers from a typo defect, which
makes the commit broken.

The typo happens to be in barebox tree, while it's not in the tested
patches I had, and there was a mismatch in my former submission, which
is fixed by this patch.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: rename powerpc manual to .rst ...

Fixes:
Documentation/boards/powerpc.rst:6: WARNING: toctree glob pattern u'boards/powerpc/*' didn't match any documents

Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: fix am335x title ...

Fixes:
Documentation/boards/am335x.rst:51: WARNING: Title underline too short.

Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>