Release v2015.06.0 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: imx6: hipercam: set default hostname in boardfile ...

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: imx6: correct Hipercam ECSPI1 pinmux ...

Correct the pinmux configuration for the chip-select GPIOs. This fixes
detection of the first SPI NOR-flash after barebox itself got loaded from
there.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i2c: omap: fix i2c bus number output ...

When probing from devicetree, the output for several i2c host
controllers prints out a bus number of -1:

i2c-omap 44e0b000.i2c: bus -1 rev0.11 at 400 kHz
i2c-omap 4802a000.i2c: bus -1 rev0.11 at 400 kHz
i2c-omap 4819c000.i2c: bus -1 rev0.11 at 400 kHz

The call to i2c_add_numbered_adapter() in probe finds out the next free
bus number, so we move the output to a location where the number is
already determined.

Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

gpio-davinci: gpio get should return 0 or 1 ...

Returning other values causes problems for client code which wants to
perform calculations with the returned value.

Signed-off-by: Jan Luebbe <jluebbe@debian.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

md: use memmap when possible ...

This adds the missing pieces for:

d8a6e1c ARM/mem: handle data aborts gracefully for md

When possible use memmap and directly and dereference the input pointer
directly in memory_display() so that the data abort occurs where we expect
it and not in the md command. With this d8a6e1c can work as expected.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'pu/am335x'

Documentation: blspec: Document blspec over NFS ...

We support booting blspec entries found on NFS servers, add documentation
for it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: blspec: Fix typo ...

The device index is missing in the example, add it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands/Kconfig: fix typo in CMD_BOOTM_OFTREE help ...

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bootm: add magicvar description for global.bootm.oftree ...

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: am33xx: Fix SCRM compatible string to match new DT compatible string ...

Commit 461f8cf renamed the SCRM compatible
string in am33xx.dtsi and breaks all am335x based boards.

Rename the SCRM compatible string.

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX5: Add missing CONFIG_ prefix in test ...

The variable name misses a CONFIG_ prefix to work as expected.

Fixes: 05a1e4b ARM: i.MX5: Do not register fixed clocks twice

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/of-device-id'

Merge branch 'for-next/mvebu'

Merge branch 'for-next/misc'

Merge branch 'for-next/mips'

Merge branch 'for-next/imx'

Merge branch 'for-next/dts'

Merge branch 'for-next/defer'

dts: update to v4.1-rc1 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Release v2015.05.0 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: phy: Do not double remove phy device ...

This fixes: 80264a8 driver: Call bus->remove instead of driver->remove

On mvebu it happens that:

Upon device shutdown, when iterating through the active device list,
the phy0 device is removed before mdio-mvebu. Then, when the mdio bus
device is removed, the phy0 device is removed again, here:

mdio_bus_remove(on mdio-mvebu)
  mvebu_mdio_remove
    mdiobus_unregister
      unregister_device
        mdio_bus_remove(on phy0)

Fix this by setting the mdio busses phy_map[phy->addr] to NULL when
unregistering the phy device, so that mdiobus_unregister no longer
finds a valid phy_device when iterating over the busses device list.

Reported-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>

Documentation: mips: fix tplink-mr3020 instruction ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: tplink-mr3020: enable nmon ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: mach-ath79: debug_ll.h: add assembler routines ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: debug_ll_ns16550.h: drop _ns16550 suffix ...

This commit makes it possible to have unified debug_ll_*
assembler routines for differrent UART program model.
E.g. we can use debug_ll_putc() routine in common
code without knowledge on exact UART model: ns16550
or ar933x.

Also rename *_check_char -> *_tstc.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: tplink-mr3020: enable PBL and compression ...

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

setenv: Be more informative when device parameter setting fails ...

When setting a device parameter fails not only the error code
is of interest, but also what the parameter name is, what the
device name is and whether a device was found for this name.
Add this information to the error message.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: increase USB_CNTL_TIMEOUT to match linux ...

USB requests should be processed within a timeframe of 5s.
The linux kernel also uses this timeout value for the control packets.

For the musb the increase in timeout helps successfully probing USB devices
(at least on one test hardware), but on the other hand doesn't slow down the
system, if there are no devices, i.e. the timeout never hits. That means,
that the USB core correctly aborts instead of timing out.
Why and how the 100ms was chosen in the first place, can not be deduced from
the git history, just that it seems to work fine for most boards.

Change USB_CNTL_TIMEOUT to 5000ms and replace all occurences of
	`USB_CNTL_TIMEOUT * x`
with just
	`USB_CNTL_TIMEOUT`,
as the timeout is now large enough without it.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>