LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

2016-05-09	79fdb84 Browse files » net: phy: Add fixed link support ... Some network devices, especially when connected to a switch, are connected via a fixed link. This patch adds support for a fixed phy configured through device tree. TODO: Add support for the "speed" and "full-duplex" properties. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Wjatscheslaw Stoljarski <wjatscheslaw.stoljarski@kiwigrid.com> Sascha Hauer committed on 9 May 2016
2016-05-04	07511ba Browse files » ARM: phytec-som-imx6: add automount for first partition on eMMC ... For the phyCORE-i.MX6 add an automount command for the first partition on the eMMC device. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 4 May 2016 Sascha Hauer committed on 4 May 2016
	a91ce45 Browse files » blspec: push appendroot handling to bootm ... The bootm code now can handle the adding of the root= option itself, so drop the code and let bootm do it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 4 May 2016
	f66990a Browse files » bootm: Optionally add a root= option to Kernel command line ... It becomes a common case that the Kernel is loaded from the filesystem which later becomes the rootfs. This adds a possibility to let bootm automatically append the root= option to the kernel command line. This is done when global.bootm.appendroot is true. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 4 May 2016
	a9b1867 Browse files » parameter: Use strtobool ... Use strtobool to convert the input string to a boolean type. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 4 May 2016
2016-05-03	d34b5ff Browse files » PCI: imx6: Add DT bindings to configure PHY Tx driver settings ... The settings in GPR8 are dependent upon the particular layout of the hardware platform. As such, they should be configurable via the device tree. Look up PHY Tx driver settings from the device tree. Fall back to the original hard-coded values if they are not specified in the device tree. [Andrey Smirnov: port to Barebox codebase] Signed-off-by: Justin Waters <justin.waters@timesys.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 26 Apr 2016 Sascha Hauer committed on 3 May 2016
	a9fe885 Browse files » PCI: imx6: Remove broken Gen2 workaround ... Remove the remnants of the workaround for erratum ERR005184 which was never completely implemented. The checks alone don't carry any value as we don't act properly on the result. A workaround should be added to the lane speed change in establish_link later. [Andrey Smirnov: port to Barebox codebase] Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 26 Apr 2016 Sascha Hauer committed on 3 May 2016
	003f558 Browse files » PCI: imx6: Move PHY reset into imx6_pcie_establish_link() ... This adds the PHY reset into a common error path of imx6_pcie_establish_link(), deduplicating some of the debug prints. Also reduce the severity of the "no-link" message in the one place where it is expected to be hit when no peripheral is attached. [Andrey Smirnov: port to Barebox codebase] Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 26 Apr 2016 Sascha Hauer committed on 3 May 2016
2016-05-02	95e1132 Browse files » ARM: phytec-som-imx6: add NOR for phycore-imx6 emmc ... Enable NOR for phyCORE-i.MX6 DualLite and Quad eMMC variants. Furthermore add an extra 'status = "disabled"' in the flash node. It has no functional effect, because the SPI bus node 'ecspi1' is disabled, too. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
	a6ec1b5 Browse files » ARM: phytec-som-imx6: adapt main update handler for eMMC ... Some phyCORE-i.MX6 variants have eMMC instead of a NAND chip. Provide an update_handler for them. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
	ac02c15 Browse files » ARM: phytec-som-imx6: rename environment folder ... The extra environment folder for the phyCORE-i.MX6 had the suffix '-mira'. That's the name of a baseboard. Since the bootloader is generic for all baseboards, use a generic suffix for the environment folder. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
	da3938f Browse files » ARM: phytec-som-imx6: update RAM calibration for phycore-imx6dl ... Update RAM calibration values in the flashheader file for phyCORE-i.MX6 DualLite/Solo. These are verified and tested in the climatic chamber for commercial, extended commercial, industrial and automotive i.MX6 variants. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
	313e01f Browse files » ARM: phytec-som-imx6: add phyCORE-i.MX6 DualLite ... Add Phytec phyCORE-i.MX6 SOM. Support: - imx6dl-phytec-phycore-som-emmc: - 1GB RAM on 1 Bank with 64Bit - 10/100MBit Ethernet - SPI NOR - eMMC - SD - UART Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
	cb3fc0d Browse files » ARM: phytec-som-imx6: add phyCORE-i.MX6 Quad 2GiB RAM ... Add new Phytec phyCORE-i.MX6 SOM: Support: - imx6q-phytec-phycore-som-emmc: - 2GiB RAM on 1 Bank with 64Bit - 1GBit Ethernet - SPI NOR - eMMC - SD - UART Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Christian Hemp authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
	c3318ae Browse files » ARM: phytec-som-imx6: fix bootsource for phyCORE-i.MX6 ... The phyCORE-i.MX6 has either a NAND or EMMC storage device and an external SD-Card interface. The automatic bootsource detection in the barebox environment should reflect that. - If the board was booted from the external SD-Card interface, it should continue loading the kernel and device tree from it. - If the board was booted from EMMC, it should load kernel and device tree from the boot partition on the EMMC. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
	0a7a5e7 Browse files » ARM: phytec-som-imx6: add barebox partitions for MMC ... Add missing MMC barebox environment partitions for the phyCORE-i.MX6 with EMMC. Otherwise the barebox cannot find the environment, when the board is boot from sd-card. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
	52fdd51 Browse files » ARM: dts: pfla02: use long enough reset for ethernet phy ... Use a longer reset time for ethernet phy Micrel KSZ9031RNX. Otherwise a small percentage of modules have 'transmission timeouts' errors like barebox@Phytec phyFLEX-i.MX6 Quad Carrier-Board:/ ifup eth0 warning: No MAC address set. Using random address 7e:94:4d:02:f8:f3 eth0: 1000Mbps full duplex link detected eth0: transmission timeout T eth0: transmission timeout T eth0: transmission timeout T eth0: transmission timeout T eth0: transmission timeout Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
	90b2fa7 Browse files » ARM: dts: imx6: phyboards: reduce clock speed for usdhc3 ... Due to hardware issues the usdhc3 interface on phyBOARD-ALCOR i.MX6 and phyBOARD-SUBRA i.MX6 doesn't work reliable at 50Mhz. You get communication errors like barebox@Phytec phyBOARD SUBRA:/ ls /mnt/mmc/ mmc2: detected SD card version 2.0 mmc2: registered mmc2 imx-esdhc 2198000.usdhc: timeout 2 mmc2: Cannot read MBR/partition table Therefore reduce the maximum clock speed to avoid these problems. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
	6444998 Browse files » imx6qdl-phytec-pfla02.dtsi: add i2c eeprom ... add atmel,24c32 mounted on module Signed-off-by: Jan Remmet <j.remmet@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jan Remmet authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
	ca5964b Browse files » ARM: imx6q: add support for phyBOARD-SUBRA-i.MX6 Quad ... Add support for phyBOARD-SUBRA-i.MX6 with phyFLEX-i.MX6 Quad 1GiB on one bank. This patch factors out the common device tree nodes for the Quad and Solo variant into 'imx6qdl-phytec-phyboard-subra.dtsi'. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
	8b0a448 Browse files » ARM: imx_v7_defconfig: add command mmc_extcsd ... Enable the mmc_extcsd command to read and write MMC/eMMC registers. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
	075de1e Browse files » ARM: imx_v7_defconfig: enable NANDTEST command ... Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
2016-04-29	a66b7f8 Browse files » getenv_bool: use strtobool ... We now have a library function to convert a string to a boolean type. Use it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Apr 2016
	22b8e94 Browse files » string: Introduce strtobool ... We have at least two places which convert a string to a boolean type, so create a common function for this. strtobool treats - any positive (nonzero) number as true - "0" as false - "true" (case insensitive) as true - "false" (case insensitive) as false Every other value results in an error and the input val is not modified. The caller is expected to initialize val with the correct default before calling strtobool. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Apr 2016
	941056d Browse files » globalvar: Allow to remove globalvars ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Apr 2016
2016-04-28	acd6437 Browse files » Kconfig: Create Kconfig symbol for NVVAR ... nvvar support not only needs globalvar, but also persistent environment storage. Add a separate default-y option which depends on ENV_HANDLING for this case. Make the option visible to let the user decide whether he wants to have this option and add a help text to make this decision easier. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 28 Apr 2016
	9a7b5d4 Browse files » Kconfig: Make ENV_HANDLING visible ... ENV_HANDLING is usable even without explicit loadenv/saveenv command support. Instead of selecting this option from loadenv/saveenv, make this option visible. loadenv/saveenv can then depend on ENV_HANDLING rather than selecting it. This reduces Kconfig dependencies hassles. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 28 Apr 2016
	5c32248 Browse files » Kconfig: Make GLOBALVAR visible ... Currently global environment variables are only enabled when the "global" command is enabled. In fact, they could be used even with the "global" command disabled, so make the GLOBALVAR option visible. While at it, add a help text for this option. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 28 Apr 2016
	469950f Browse files » ATA: Implement a hook for 'devinfo' ... Implement simple adapter function to serve as a hook for 'devinfo' command. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 27 Apr 2016 Sascha Hauer committed on 28 Apr 2016
	52da32e Browse files » scripts: Add big endian conversion macros to endian.h ... Some programs need the big endian macros, add them to andian.h Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 28 Apr 2016