Release v2017.08.0 ...

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

gpiolib: Simplify code of gpio_request_one() ...

Looks like we can get rid of an 'if' and 'goto', so do it to simplify
the code.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

gpiolib: Fix buggy flag detection code ...

Both GPIOF_ACTIVE_LOW and GPIOF_INIT_ACTIVE are multi-bit constants so
detecting their assertion using simple bit-wise and is incorrect and
would lead to false positives.

Fixes: bbc499914 ("gpiolib: Add code to support "active low" GPIOs")

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

state: backend_bucket_circular: fix old state reads ...

When the circular bucket meta magic was not found, it is assumed that
the whole written state is in the old on-storage format. In that case,
the size of the circular bucket meta must not be subtracted from the
read length, or the (complete_len > len) check in the raw backend's
verify function will fail:

    state: Error, invalid data_len 16 in header, have data of len 24

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

i.MX: clk-pllv3: Initially disable PLL_BYPASS bit ...

Commit cbff8031b491 ("i.MX: clk-pllv3: Do not touch PLL_BYPASS bit")
overreached a bit by removing the code that disables the PLL_BYPASS bit
for all architectures instead of making an exception for Vybrid and
i.MX6SL. This causes the USB controller on i.MX6Q to run at bypass
frequency and fail:

    barebox@Boundary Devices i.MX6 Quad Nitrogen6x Board:/ usb
    usb: USB: scanning bus for devices...
    usb: Bus 001 Device 001: ID 0000:0000 EHCI Host Controller
    imx-usb 2184200.usb: port(0) reset error

This patch adds code to unconditionally disable the PLL_BYPASS bit
initially, when the PLL clocks are registered.

Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Fixes: cbff8031b491 ("i.MX: clk-pllv3: Do not touch PLL_BYPASS bit")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

crypto: caam: use dma_alloc_coherent instead of dma_alloc ...

dma_alloc return non-coherent memory, but the driver does no cache
maintenance on the buffer, causing memory corruption. Fix this by
requesting coherent memory for the DMA transfer.

Fixes: ef4144b4ab63 (crypto: caam - fix RNG buffer cache alignment)
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

gpio: move active state function stubs to GPIOLIB ...

Those are only implemented by GPIOLIB, not by GENERIC_GPIO.
Fixes like failure on old platforms, that aren't converted to
gpiolib, yet.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

crypto: digest: Fix digesting over memory chunks > 4096 bytes ...

There are two different cases that are handled in digest_file_window:

 a) the file to digest is memmappable (e.g. /dev/mem)
 b) it isn't (e.g. files in /)

In both cases a file is digested in hunks of (up to) 4096 bytes. After
each hunk in b) the buffer that is fed to digest_update() is then
overwritten using read() to get the next hunk to digest. In case a)
however it was forgotten to step forward in the buffer and instead the
same data was handed to digest_update() again and again.

So to fix that increase buffer by the number of bytes already digested
for case a) which is characterized by flags == 0.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

gpio: fix null pointer exception when there is no oftree ...

In a system with oftree support enabled but with no oftree the
of_gpiochip_scan_hogs() would fail due to device_node equals NULL.

Check device_node and return with 0 in this situation, as this
mirrors what would have happened before we added support for gpio-hogs.

Use IS_ENABLED(CONFIG_OFDEVICE) to teach compiler to leave
out the of_* specific functions if not needed.

Fixes: 37e6bee7 ("gpiolib: Add support for GPIO "hog" nodes")
Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

clk: fix clk_get error handling ...

If there is no OFTREE support of_clk_get_by_name failed with
-ENOENT, which caused clk_get to bail out.
This had the effect that nothing was printed on the serial console
with at91sam9263-ek.

There are no error paths that will return -ENODEV as we test for today,
so change this to -ENOENT which is in use.
This allows us to contine with clk_get_sys() in case of other
errors as was the intention of the original fix.

Fixes: 90f7eacb ("clk: let clk_get return errors from of_clk_get_by_name")
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

Revert "param: fix stub prototype of dev_add_param" ...

This reverts commit 441941f, which was on
top of the recently reverted nvvar rework, so needs to be reverted, too.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

Merge branch 'for-next/state'

Merge branch 'for-next/ratp'

Merge branch 'for-next/mvebu'

Merge branch 'for-next/mtd'

Merge branch 'for-next/misc'

Merge branch 'for-next/imx'

Merge branch 'for-next/dts'

Merge branch 'for-next/clk'

Merge branch 'for-next/arm'

Release v2017.07.0 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

enable LFS support for host programs ...

This fixes building on an XFS partition on a 32 bit machine:

	$ armmake -C ~/gsrc/barebox O=$PWD imx_defconfig
	  HOSTCC  scripts/basic/fixdep
	fixdep: error fstat'ing depfile: scripts/basic/.fixdep.d: Value too large for defined data type

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

docs: mvebu: describe -n more accurately in the sphinx document ...

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts/kwboot: document -n option ...

This was forgotten in the commit that added support for that option

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: socfpga: remove unused fpgaintf setup ...

The disable bits for the ethernet interfaces between FPGA and HPS are read
and configured, but never written back.
The configuration itself doesn't make that much sense however. So instead of
writing it back to the register, remove the whole read-modify operation altogether.

Reported-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: boards: phytec-som-am335x: Update boot scripts ...

Expand the boot scripts by eMMC and clean them up.
Add NV variable files and removed unnecessary kernel bootargs from the
boot scripts.
Add "rootflags='data=journal'" bootarg to SD card boot script.

Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: omap: Fix error printing ...

Presumably the code wanted to print the error with the %d format
specifier. Actually pass the error code by using PTR_ERR() and not
IS_ERR(). While at it use %ld to print a unsigned long variable to
get rid of a compiler warning.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: omap: phytec-phycore-omap4460: Fix compiler warning ...

Use IS_ENABLED() rather than #ifdef to get rid of unused variable
warning.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: Make locally used function canonicalize_dir() static ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pinctrl: at91: Bail out if atmel,pins property does not exist ...

Do not blindly assume that a device node has a atmel,pins property.
Instead, test it for being NULL before using it. This also silences
a compiler warning when the driver is compiled without OF support.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>