LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

2017-09-27	9f36f6d Browse files » file_list: Add function to add an entry to the list ... Add file_list_add_entry() to add a single entry to a file_list. Then use it in file_list_parse_one() instead of open coding adding a new entry. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Sep 2017
	857f60c Browse files » ARM: rename flush_icache to icache_invalidate ... flush_icache is a misnomer since the icache is invalidated, not flushed. Rename the function accordingly. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Sep 2017
	d9d8876 Browse files » ARM: cache-armv7: Use designated instructions for isb/dsb/dmb ... armv7 has designated instructions for the barrier operations, so use these rather than cp15 operations. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Sep 2017
	87f3efc Browse files » usbgadget: unregister when usb_composite_probe() fails ... When usb_multi_register() returns an error it can't be called again as we do not unregister the driver properly. Fix this. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Sep 2017
	9e6ddf3 Browse files » usbgadget: only set to peripheral mode when error checking is done ... Only begin to modify the hardware when the obious errors have been checked. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Sep 2017
	bc7e00c Browse files » usbgadget: do not register when no functions present ... registering a multifunction device makes only sense when there's at least one function configured. Just return otherwise. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Sep 2017
	bf03086 Browse files » usbgadget: autostart: Handle errors in file list gracefully ... file_list_parse() can fail and returns an error pointer. Print an error message when it fails and also set to NULL again so that usb_multi_register() does not stumble upon the error pointer. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Sep 2017
2017-09-26	9b9379e Browse files » scripts: imx imx-usb-loader: Fix last transfer error message ... When doing memory read transfers there will always be 64 bytes transferred, even when less bytes are requested. This is expected and there is a test skipping the error message in this case. The test is wrong though since cnt is not decremented and will never be equal to rem. Fix the test so that verifying memory does not give a bogus error message. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 26 Sep 2017
	2096492 Browse files » scripts: imx imx-usb-loader: Add support for i.MX6ull ... Same as other i.MX6 variants, just add the product id. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 26 Sep 2017
	b5289b7 Browse files » mmc: allow skipping SD card initialization ... This patch allows to skip SD card initialization for eMMCs by setting the "no-sd" property in the host controller device tree node. Avoiding two SD command timeouts speeds up detection time by well over 200 ms. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Philipp Zabel authored on 20 Sep 2017 Sascha Hauer committed on 26 Sep 2017
	25e67cb Browse files » remove checks for xzalloc() returning NULL ... xzalloc() either returns memory or panics, so checking for NULL is useless. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Uwe Kleine-König authored on 25 Sep 2017 Sascha Hauer committed on 26 Sep 2017
	347ab85 Browse files » pinctrl: mxs: fix error message to mention right property name ... Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Uwe Kleine-König authored on 24 Sep 2017 Sascha Hauer committed on 26 Sep 2017
	b9bbbc9 Browse files » imx-bbu-nand-fcb: read_firmware_all(): Spell "Secondary firmware" with a capital "S" ... "Primary firmware" is writte with a capital "P" so adjust "Secondary firmware" to use a capital "S". Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marc Kleine-Budde authored on 22 Sep 2017 Sascha Hauer committed on 26 Sep 2017
	0b8f344 Browse files » console_countdown: ignore errors in getchar() ... The getchar() call may return an error reported as a -1, e.g. when the console detects a RATP message and switches to RATP mode. In general it probably is a good idea to ignore these errors in the console countdown operation; and in particular for the RATP usecase, this also prevents from interfering with the countdown and menu just when switching one of the consoles to RATP mode. As a hint, this is what the standard console was printing due to this issue when the RATP console was activated: Hit m for menu or any other key to stop autoboot: [: missing `]' Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Aleksander Morgado authored on 20 Sep 2017 Sascha Hauer committed on 26 Sep 2017
	b661648 Browse files » ARM: i.MX53 QSB: drop phy reset handling in board file ... Since commit 5c1846b62524 ("ARM: i.mx53: Parse Reset GPIO pin in FEC driver from Devicetree") the fec driver ensures a phy reset. As there is little use in resetting twice, drop the reset from the board file. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Uwe Kleine-König authored on 22 Sep 2017 Sascha Hauer committed on 26 Sep 2017
	b2ac13f Browse files » gpiolib: check validity for gpio_info in *_active() ... gpio_set_active, gpio_is_active and gpio_direction_active are public functions, accordingly there should be error checking. If an invalid gpio number is given to these functions without checking gpio_adjust_value is called with gi == NULL which then dereferences this pointer. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Uwe Kleine-König authored on 21 Sep 2017 Sascha Hauer committed on 26 Sep 2017
2017-09-20	340af0a Browse files » lib,ratp: avoid too verbose info messages ... When using a cli-based RATP that opens and closes the RATP channel for each command sent/received, it gets annoying to get the "Closed" message printed all the time in console after each RATP channel close operation. Just demote it to debug level. E.g.: barebox@barebox sandbox:/ ratp: Closed ratp: Closed ratp: Closed ratp: Closed ... Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Aleksander Morgado authored on 19 Sep 2017 Sascha Hauer committed on 20 Sep 2017
	22e1ba9 Browse files » net: ag71xx: disable eth interface on barebox shutdown ... If not disable, DMA RX engine will keep to write in to allocated memory area. As soon as some code or data of target OS will be placed to this area it will be overwritten by incoming network package. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 18 Sep 2017 Sascha Hauer committed on 20 Sep 2017
	f5098c4 Browse files » MIPS: dts: ar9344: add APB bus ... and move nodes which belong to APB. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 14 Sep 2017 Sascha Hauer committed on 20 Sep 2017
	d7fdf95 Browse files » MIPS: tplink-wdr4300_defconfig: add network support ... Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 14 Sep 2017 Sascha Hauer committed on 20 Sep 2017
	a93762e Browse files » MIPS: dts: tl_wdr4300: rename it to tl_wdr4300 v1.7 ... The minor version of TP-Link are usually big enough that it need extra vendor partition on the flash with additional configurations like PLL, CPU and RAM freqs. Visually I was able to confirm at least different SPI Flash and RAM chips. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 14 Sep 2017 Sascha Hauer committed on 20 Sep 2017
	e9edd1a Browse files » net: phy: add ar8327 driver ... The Atheros ar8327 is a seven port gigabit ethernet switch. This patch adds a driver for the phys in it. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 14 Sep 2017 Sascha Hauer committed on 20 Sep 2017
	15af9fc Browse files » memtest: fix list iteration in region setup ... When memory regions start at 0, the current mem_test_request_regions function wrongly assumes that struct resource *r points at the correct region. It points to the first region however (which starts at 0). The comment states, that the code starts from the second entry. In include/linux/list.h the macro documentation however says: list_for_each_entry_from - iterate over list of given type from the current point The correct list iteration macro to use here is list_for_each_entry_continue, where the documentation says: Continue to iterate over list of given type, continuing after the current position. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Steffen Trumtrar authored on 18 Sep 2017 Sascha Hauer committed on 20 Sep 2017
	0ed5c2a Browse files » bootm: bootm_open_initrd_uimage(): propagate error if initrd verification fails ... If the verification of an initrd inside of an uImage fails an error message is printed but the error is not propagated. Although this is not security relevant, as the verification is currently only a CRC32 check, the error should be returned. This patch fixes the problem. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marc Kleine-Budde authored on 19 Sep 2017 Sascha Hauer committed on 20 Sep 2017
2017-09-18	130fc67 Browse files » MIPS: dts: tl_wdr4300: remove RO flag from barebox partition ... we need it RW for barebox updates. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 14 Sep 2017 Sascha Hauer committed on 18 Sep 2017
	6f618cd Browse files » MIPS: dts: tl_wdr4300: add alias for spiflash ... to unify the naming with TP-Link TL-MR3020. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 14 Sep 2017 Sascha Hauer committed on 18 Sep 2017
	2cc166f Browse files » MIPS: dts: tl_wdr4300: enable mac0 ... Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 14 Sep 2017 Sascha Hauer committed on 18 Sep 2017
	6877d4f Browse files » MIPS: dts: ar9344: add mac0 node ... this node is supported by ag71xx driver Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 14 Sep 2017 Sascha Hauer committed on 18 Sep 2017
	4864aa9 Browse files » add ar9331.dtsi and enable mac0 ... Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 14 Sep 2017 Sascha Hauer committed on 18 Sep 2017
	266141c Browse files » net: ath79: add ag71xx Ethernet driver ... Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Yegor Yefremov authored on 14 Sep 2017 Sascha Hauer committed on 18 Sep 2017